WORK CENTER FOR WOOD WALLS Block House

WORK CENTER FOR WOOD WALLS Block House ESSETRE Machining center with 8 continuous interpolating axes, with automatic movement of the pieces, for block machining house. Techno Block House is a patented work center designed specifically to carry out "block house" processes on beams with maximum section 320X250mm, fully automatically and quickly, ensuring high productivity and eliminating set-up times The loading of the beams within the work area occurs automatically, using a gripper managed by the numerical control, which is adjusted according to the size of the beam. The Techno Block House machining center has a solid structure in electro-welded carpentry and is equipped with a group Ø 1000mm blade driven by a 23 Kw motor at 1,400 rpm / 1, capable of making straight and inclined cuts with positive and negative angles of 350 °. The blade can also assume a simultaneous tilt position of 45 ° positive cut. Then there are two groups (one vertical and one horizontal) that work simultaneously to perform block operations house. Both are driven by a 23 Kw motor at 4,000 rpm and have the ability to install block cutters house with maximum diameter 350x320mm. nr. 1 horizontal drilling unit from 4.4 kW to 3000 rpm with ERG 40 collet attachment and the possibility of mounting bits with a Ø max. 60mm nr. 1 horizontal "spindle moulder" unit from 16 Kw to 9000 rpm for horizontal head milling, Nr. 1 additional horizontal drilling unit from 4.4 kW to 3000 rpm / 1 'with the possibility of mounting drills with a max. Ø. 60mm Nr. 1 double horizontal transversal milling unit (to replace the "spindle moulder" group and in relation to the overall dimensions of the block house cutters installed) to make the interlocking pockets of the floor beams. Nr. 1 vertical scoring unit to avoid possible chipping when cutting with the blade Once the work is finished, the beam is automatically transported to the unloading roller conveyor and deposited on some lateral supports by means of a special pneumatic mechanism. The Techno Block House work center is equipped with a connection to the suction system by means of no. 5 mouths Ø 200mm (plus a possible Ø 120mm mouth in case of installation of the Z4 double horizontal transversal milling unit) and by an innovative pneumatic system able to expel the shavings from the cutting area, without having to interrupt the working cycle. The power installed on the Techno Block House work center is 90 kW In addition, the machining center is managed by an industrial digital numerical control which gives it a very high flexibility.